This formulation includes 58%-61% solid content which is often
twice that of competing brands.
Deck-Pro
is an easy to use
environmentally friendly, waterborne acrylic epoxy blend that
really performs. Use
Peel Stopping Primer
and Deck Pro II
on
decks, docks, handrails, ramps and walkways. It holds up to
inclement weather, salt air, heavy foot traffic, pool chemicals,
constant wet and dry conditions and the destructive effect of
ultra violet rays. It is acceptable for use in interior and
exterior applications. Use it in high traffic hard use areas where
exceptional weathering properties and excellent color retention
are desired. Fast drying and suitable for use in cold weather
conditions. Acceptable for use on pressure treated wood. For added
slip resistance in high traffic areas add 1 lb
Gaco-Grip or
Tred-Tex
paint additives on a per gallon basis. For best results apply one
coat of TS-100-10 Peel Stopping Primer and two coats of
Deck-Pro
II. Don’t forget to get Peel-Stopping Primer!
Works with Peel Stopping Primer for lasting
results.
Lasts longer than home center brands.
Produces a hard durable finish on almost any
surface.
Economical and easy to use.
Color fast indoors or outdoors.
Self leveling formula reduces brush and roller
marks.
Allows low temperature applications down to 35F.
Stats:
Practical
coverage is up to 300 square feet on sealed surfaces -
approximately 250-300 square feet per gallon on wood, masonry,
concrete or unsealed surfaces depending on texture and porosity.
Dry to the touch in 1 hour. Pot life: Not applicable. Not
recommend for constant immersion service, strong acid or chemical
exposure. Apply by brush, roller or spray. Available in gallon or
five gallon cans. Available in satin, semi-gloss and 100 deck
paint colors.
Recommended
preparation:
Refer to
Application Instructions Sheet included with order, label
directions and standard industry application practices. Wood-For
best results sand prior to application, remove existing deck
paint, loose scale, wax, oil and contaminates. All wood surfaces
must be thoroughly dry (20% maximum Moisture content) before
application. Concrete, masonry, tile, steel- strongly recommend
the use of TS-695 Etching Cleaner.
Recommended
primers:
Works best when used in combination with
Peel Stopping
Primer. Acceptable for use with
Etching Primer.
Thin & clean
up:
Thins and washes up easily with water.
