Decade Etching Primer
(TS-664) is very well liked because it creates an
exceptionally tenacious bond to virtually any surface it
is applied to. It makes painting wood, concrete,
plastic, aluminum, tile, steel, vinyl even composite
materials such as TimberTech and Trex a no-brainer. It
covers in just one coat producing a tenacious bond
quickly and effectively without the worry of mixing
multiple components or limited pot life. It is highly
effective, economical to use and easy to apply. Etching
Primer produces a sound base in preparation for 10-Year
Deck Paint. The build is high, it will fill and seal
small cracks and voids. It can be built up with a brush
to fill larger voids then sanded smooth. It is flexible
enough to be applied directly vinyl sheet goods. It may
be used in areas where there is light motorized
traffic.
Decade Etching Primer meets government specification
number TT-P-664D so you know you are getting the best.
It is a hi-performance phenolic modified alkyd primer
specially formulated for use on hard to paint
surfaces. It is a high solid primer that dries fast,
inhibits rust, is resistant to salt, pool chemicals hot
solvents and standing water without the worry of lifting
or wrinkling.
·
Creates an unbreakable etching bond to whatever it is
applied to.
·
Covers
in just one coat.
·
Produces a hard yet flexible base for paint on any
surface.
·
Easy
application; just brush, roll or spray it on.
·
Economical and easy to use.
·
Will
not pick up due to hot tires.
·
Withstands temperatures from -40F to +350F
·
Allows
low temperature applications down to 35F.
Stats:
This product is intended to serve as a primer. A
protective coating must be applied over it as a wear
layer. Typical coverage is 250-300 square feet per
gallon, depending on the texture and porosity of the
surface being treated. Dries to the touch in 30 minutes.
Recoatable in 2 hours. Apply by brush, roller or spray.
Allows for low temperature curing (as low as 35 F.)
Color: White or Red Oxide. Finish is low sheen.
Recommended preparation:
Refer to Application Instructions Sheet, label
directions and standard industry application practices.
For best results remove existing deck paints, deck
coatings, loose scale, wax, oil and contaminates. For
best results sand prior to the application. All
substrates must have maximum 19% or less moisture
content.
Thin &
clean up:
Use only with factory recommended thinner (TS-605
Thinner).